Forklift terminal resistive

Startseite » Logistics » MOBILE

The resistive forklift terminal of the MOBILE series

FORSIS offers three different variants in the field of mobile forklift terminals, each of which is adapted to specific customer requirements. Because forklift terminals should always get along with the minimum external dimensions, but offer a maximum LCD viewing area.
The resistive forklift terminal with the name MOBILE has been designed with an analog resistive touch and is available in the LCD sizes 10 ", 12" and 15 " is restricted - because security is our top priority.

The touchscreen technology of the resistive forklift terminal is based on the proven 5-wire resistance technology from ELO and is called AccuTouch. This technology is designed for applications that require the highest level of reliability, input flexibility and contamination resistance.
The Accutouch screens use a glass plate with a uniform resistive coating. A thick polyester cover film is pulled onto the surface of the glass and has small, transparent isolation points, which create a change in resistance when printing, i.e. when entering data.

The main difference between mobile and stationary devices is their power supply, energy management and vibration protection.

  • The protection class of the resistive forklift terminal [EN60529] is IP65 on the front and, depending on the type and design, IP54 on the connection side
  • Approvals: CE, FCC
  • Vibration and shock test according to DIN EN 60721-3-5 / 5M3
  • Radio connection: IEEE 802.11 ac / g / n
  • Bluetooth interface, if WLAN adapter is integrated
  • Standard temperature range: -20 ° C to 50 ° C due to the selected components
  • Humidity: 0-90% non-condensing
  • Technology: AccuTouch 5-wire resistance sensors
  • Input methods: fingers, styluses, pens, gloves, etc.
  • Light transmission: HL products: 80%; + -5% at 550 nm wavelength
  • Cover glass thickness: T = 1.8mm
  • Surface treatment: clear
  • Lifetime: AccuTouch Zero-Bezel. Each touchscreen meets pen hardness 4H according to ASTM D3363
  • Sealability: Sealing according to NEMA4, NEMA12 and IP65 possible
  • Resolution: Touch point density according to controller resolution 4096 x 4096
  • Positioning accuracy: standard deviation error <0.080 (2 mm)
  • Operating temperature: -10 ° C to 60 ° C
  • Storage temperature
  • High temperature storage: 70 ° C for 240h - after 24h room temperature and test
  • Low temperature storage: -40 ° C for 240h after 24h room temperature and test
  • Humidity: 90% relative humidity at max. 50 ° C
Sales
Our sales team will gladly answer your questions!

Mechanical structure of the resistive forklift terminal

Staplerterminal Resistiv Front10 Min
  • The housing of the resistive forklift terminal is made of steel / aluminum sheet parts. These are powder-coated on the outside and galvanized on the inside
  • The device structure is compact and vibration-proof
  • The resistive forklift terminal has minimal cabling and no mechanically moving components
  • The heat dissipation at the resistive forklift terminal takes place via the rear ten millimeter thick mounting plate, all heat-generating components dissipate here
  • At the same time, this plate also offers mounting preparation in VESA 100 format

Forklift Terminal Resistive Specifications

Staplerterminal Resistiv DC IN Min
  • The protection class of the resistive forklift terminal [EN60529] is IP65 on the front and, depending on the type and design, IP54 on the connection side
  • Approvals: CE, FCC
  • Vibration and shock test according to DIN EN 60721-3-5 / 5M3
  • Radio connection: IEEE 802.11 ac / g / n
  • Bluetooth interface, if the WLAN adapter is integrated in the resistive forklift terminal
  • Standard temperature range: -20 ° C to 50 ° C due to the selected components
  • Humidity: 0 - 90% (non-condensing)

The control unit of the resistive forklift terminal

Staplerterminal Resistiv Arbeitsplatz Min

The touchscreens of the resistive forklift terminal have an extremely long service life. The AccuTouch series determines the X and Y coordinates on a stable under glass plate. For this reason, the touchscreens with resistance sensors guarantee an extremely long service life - they are designed for a frequency of use of more than 35 million touches.
The lower glass pane is covered with a plastic film. In this way, if the panel breaks, no glass splinters can get in the direction of the operator. Operation can be carried out with gloves, pens, pens, etc. The touchscreen is calibration-proof and insensitive to surface moisture.

The touchscreen of the resistive forklift terminal can also be sealed against contamination in accordance with the NEMA4 / 4x / 12 and IP65 standards. Each touchscreen meets pen hardness 4H according to ASTM D3363. Homologations: UL, cUL, TÜV, CE and FCC Class A.

Dimensions of the resistive forklift terminal of the MOBILE series

Staplerterminal Resistiv Detail Min

Below you will find the external dimensions of the resistive forklift terminal of the MOBILE series. All information in mm.

  • Variant 1000
    LCD size: 10.4 "
    Width: 267 / Height: 236 * / Depth: 70
    Weight: 3.3 kg
  • Variant 1200
    LCD size: 12.1 "
    Width: 300 / Height: 266 * / Depth: 70
    Weight: 5.2 kg
  • Variant 1500 **
    LCD size: 15 "
    Width: 365 / Height: 305 / Depth: 79
    Weight: 7.1 kg

* The impact-resistant antenna housing with IP65 protection class increases the housing height of the resistive forklift terminal by 60mm
** Only available with analog resistive touchscreen technology

The difference between the models of the forklift terminal series is not only in the touchscreen technology but also in the connection rows and the associated device depth.

WLAN connection according to IEEE802.11 ac / g / n combined with Bluetooth V4.0

Staplerterminal Resistiv WLAN Min
  • The resistive forklift terminal offers a MINI PCIe slot - free choice of WLAN adapter
  • FORSIS offers its own antenna for all device series.
  • The antenna consists of three differently oriented individual antenna systems. Depending on the number of antenna connections of the WLAN card used, these can be combined as desired
  • The antennas work in the 2.4 GHz - 5 GHz range. This means that Bluetooth signals can also be sent to these antennas, especially with the combination WLAN adapter
  • The Wi-Fi 802.11 ac / g / n standard and Bluetooth V4.0 are supported
  • In addition to implementing the n-standard, our aim was to develop a robust antenna with protection class IP65

Cable protection / strain relief - connection side

Staplerterminal Resistiv CLOSE Min

All cable connections of the resistive forklift terminal are on the back and go downwards. Four screw terminals are attached to a carrier to relieve strain on the cables. This carrier can be removed using a secured knurled screw.
Specifically, this means: simple and one-time installation of the cables. The cable carrier remains at the place of use even if the device is replaced.

Protective cover - rear view
To protect the plug connection, the entire connection side of the resistive forklift terminal can be closed by a protective cover. The cover is secured by two stud bolts and two knurled screws.

Andreas Brenke Vertrieb

"We will gladly answer your questions"

+49 (0) 751 76 414 0

Integrated or external UPS unit on the resistive forklift terminal

Staplerterminal Resistiv Akku Min

The optional AKKU unit is used for short-term support of the supply voltage. With the MOBILE 1000 the ACCU unit is external, from the MOBILE 1200 variant it is integrated in the device. The same applies to the MOBILE MT and MOBILE MF series.

  • The battery works in standby mode and serves as a support in the event of brief break-ins
  • It bridges power failures for up to five minutes or depending on the type of battery
  • The monitoring and charging electronics enable a controlled, time-controlled shutdown

Below you will find the technical basics on which the forklift terminal is based on resistive properties. You will find this basic technology as a basis in all devices of the MOBILE series and is responsible for the successful and error-free operation of the forklift terminals.

  • Wide range input of the supply voltage from 9 to 30 volts DC, expandable with external DC / DC converters up to 90V DC
  • Protective circuit in the event of voltage drops below 8V DC, the forklift terminal switches off after ten attempts
  • Protective circuit in the event of voltage peaks through integrated cypressor diode from 35V DC
  • Minimization of power consumption to the lowest possible values ​​- the power consumption in operation is only approx. 25 watts, in standby even less than one watt
  • The DC / DC converter unit can withstand loads of up to around 65 watts
  • As an option, an additional battery operation with optional standby operation
  • The housing of the forklift terminal resistive is subdivided into a "CPU unit" and the "HMI unit"
  • The CPU unit is made of sheet steel - the motherboard is firmly screwed onto the housing. This housing part is powder-coated on the outside and galvanized on the inside
  • The HMI (Human Man Interface) contains the LCD and the touch screen. The housing of the front unit is made of powder-coated aluminum. The touchscreen is glued in from the front or the rear, depending on the variant
  • The device structure of the resistive forklift terminal is compact and vibration-proof
  • Minimized cabling and no mechanically moving components
  • The heat is dissipated via the 10 mm thick mounting plate at the rear, all heat-generating components are mounted directly here and dissipate the resulting heat directly from here
  • At the same time, this plate also offers mounting preparation in VESA100 format