Mobile warehouse workplace

Startseite » Logistics » Mobile warehouse workplace
Mobiler Arbeitsplatz Lager X Iso

Great variety with the mobile warehouse workstations from FORSIS

FORSIS offers you three variants of the mobile warehouse workstation with flexible storage areas.
The three different trolley designs differ in the size of the storage space. All three versions of the mobile warehouse workstations offer plenty of space to accommodate industrial PCs, peripheral devices and other identification systems.

Due to the most varied of customer requirements, new versions of our mobile warehouse workplaces are constantly being created. The most important criterion is always the largest possible work surface to accommodate printers, scanners, scales and much more. That is why we have made it our goal to develop our mobile warehouse workplaces with maximum space. The solution was to distribute the peripheral devices on two levels.

The mobile warehouse workstation is determined by the dimensions of the upper shelf. We have typed these.

  • Type S - narrow version - top shelf with 35 x 66 cm
  • Type M - medium variant - top shelf with 58 x 66 cm
  • Type L - large version - top shelf with 58 x 100 cm

We work with the dimensioning of the storage space on customer request, if you need something else a call is enough.

Below you will find more information about our three mobile warehouse workplaces.

The narrow version of the mobile warehouse workstation is ideal for narrow routes in the warehouse. The shelf space is 35 x 66 cm (WxD).

Due to the very compact design, the battery capacity of this mobile warehouse workstation is limited to the installation of a maximum of one battery unit with approx. 40 Ah.
Only the version with 350W is possible as a DC / AC converter unit.

  • Power supply for the components
    Battery technology: Type: lead gel / power: 40 Ah / voltage: 24 V DC
    Charging technology: 10A charger, integrated
    Converter: 350W / voltage: 230V AC
  • Overall dimensions (viewed in the sliding direction):
    Width: 350 mm
    Depth: 690 mm
    Height: 950 mm
  • Dimensions of the upper shelf in the sliding direction:
    Width: 345 mm
    Depth: 685 mm
    Height from the ground: 950 mm
  • Dimensions of the printer room:
    Width: 280 mm
    Depth: 600 mm
    Height: 270 mm
  • Height of the push handle: 915 mm

The mobile storage workstation type M offers an upper work surface of 58 cm wide and 66 cm deep.
The basic body used here forms the substructure for this as well as for the next larger car version.

  • Power supply for the components
    Battery technology: Type: lead gel / power: 65, 85 or 115 Ah / voltage: 24 V DC
    Charging technology: 10A or 15A charger, integrated
    DC / AC converter: 350W, 600W, 1200W or 1800W / voltage: 230V AC
  • Overall dimensions (viewed in the sliding direction):
    Width: 580 mm
    Depth: 690 mm
    Height: 1070 mm
  • Dimensions of the upper shelf in the sliding direction:
    Width: 575 mm
    Depth: 655 mm
    Height from the ground: 1070 mm
  • Dimensions of the printer room:
    Width: 600 mm
    Depth: 560 mm
    Height: 400 mm
  • Height of the push handle: 1000 mm

The mobile storage workplace offers even more space on the work surface with the dimensions of the upper shelf area 58 depth x 100 width cm.

The lower area of ​​the mobile warehouse workstation is exactly the same as in the middle variant. In vehicle construction, one speaks of the chassis and running gear. We do this too!

  • Power supply for the components
    Battery technology: Type: lead gel / power: 65, 85 or 115 Ah / voltage: 24 V DC
    Charging technology: 10A or 15A charger, integrated
    DC / AC converter: 350W, 600W, 1200W or 1800W / voltage: 230V AC
  • Overall dimensions (viewed in the sliding direction):
    Width: 580 mm
    Depth: 1000 mm
    Height: 1070 mm
  • Dimensions of the upper shelf in the sliding direction:
    Width: 575 mm
    Depth: 955 mm
    Height from the ground: 1070 mm
  • Dimensions of the printer room:
    Width: 600 mm
    Depth: 560 mm
    Height: 400 mm
  • Height of the push handle: 1000 <mm
Sales
Our sales team will gladly answer your questions!

General mechanical properties of the mobile warehouse workplace

Mobiler Arbeitsplatz Lager M Iso Min

Common MECHANICAL properties of all mobile warehouse workstation variants:

  • Extremely stable and resilient tubular steel construction
  • Base body made of sheet steel, powder-coated, gray / blue
  • 2x swivel castors 125mm with stopper, solid rubber tires
  • 2x fixed castors with 125mm diameter, solid rubber tires
  • Basic body with removable back panel
  • Push handle at the appropriate height
  • Keyboard tray
  • Drawer

The basic body of the mobile warehouse workplace

Mobiler Arbeitsplatz Lager Akku Status Min

The basic body of the mobile warehouse workstation offers space for the battery units as well as for the printer. The following are the most important properties:

  • Dimensionally stable workstation with a solid tubular frame
  • Basic body made of sheet steel, housing including two removable steel fronts
  • Standard color scheme dark gray (RAL7015), dark blue (RAL5002)
  • Coloring according to customer requirements is also possible

Heavy-duty printer pull-out can be loaded up to 30 kg

Labeling and on-site printing is one of the main focuses of mobile workplaces. This is why the mobile warehouse workstation offers a heavy-duty printer pull-out as an extension option.

Options and expansion options for the mobile warehouse workstation

Mobiler Arbeitsplatz Lager M Griff Min

Push handle

The practical push handle enables safe and easy control of the mobile warehouse workstation.

Lockable drawer

A drawer is part of the standard equipment of the basic body and offers space for many things that you need on the go.

Mounting bracket

FORSIS MAP KBD Total Min

Is the space available on the standard storage space not enough for you?

The mounting bracket can help as an extension. This accessory part for mobile workstations enables devices that are otherwise positioned on the shelf to be moved upwards on the bracket.
This brings a lot of order into the daily routine. Primarily because the end device no longer takes up any space on the work surface. But if it depends on the mounting bracket, very simple cabling is also possible. These cables then no longer interfere with the work surface in any way. Just like e.g. the scanner or a connected PDA.

In principle, all mobile workplaces can be supplemented with the mounting bracket. The assembly takes place via the fastening points of the work surface. The mounting brackets are available from the body M. Depending on the storage area selected, it naturally makes sense to use the entire width of the mAP. FORSIS offers different mounting brackets. The structure and the fastening are identical. Only the width of the mounting bracket differs.

Storage space on top of the mounting bracket

MAP A4 Ablage Frei Min

Zusätzlich bieten wir am Montagebügel noch die Option der "DIN A4" Ablage.

Natürlich für die Aufnahme Ihrer Schriftstücke gedacht. Aber so stabil ausgeführt, dass auch kleine Etikettendrucker dort Platz finden.

Desk shelf

FORSIS MAP Desktop G Front Min

In addition to the "mounting bracket" option, we also offer the "desk shelf".

Here, too, with the aim of securing and expanding your space requirements. With the "desk shelf", the mobile office offers even more functionality.

You get a third level, so to speak. In addition to the printer position below and the normal work surface at table height, the desk shelves offer other possible uses upwards. For example, storage compartments, magnetic suspensions and much more are available.

The desk shelves are easy to attach and can also be retrofitted to existing mobile workstations. Two variants are offered as standard, whereby your needs can also be taken into account here.

Side shelf

FORSIS MAP Side Table2 Min

Taking along and using printers is one of the main reasons and purposes of mobile workstations.

On the one hand, it is of course technically demanding to ensure the appropriate power supply. You can find more information on this in the separate data sheet.

Another important point is safe mechanical storage and ergonomic use. Above all, changing the label roll or changing the paper must be quick and easy. Printers can be positioned on three levels:

The classic place at the bottom of the printer pull-out - preferred for laser printers
On the work surface - preferably for label printers
On the additional side shelf

Keyboard drawer

FORSIS MAP KBD Iso Min

Clean desk also for mobile workplaces.

A keyboard is usually included. With the additional keyboard shelf with pull-out, we offer you the option of keeping the keyboard safe and always at hand.

Please note. The height of the printer, which could stand underneath, is reduced accordingly.
We are at your disposal for advice here.

Order picking container

FORSIS MAP Box Flat Min

The desire was repeatedly expressed to expand the mobile workstation so that it can also be used as a mobile picking station.

In the course of a further development, this option has now also been created.
It is based on a flexible mounting system, which was implemented to securely hold the plastic tub. The plastic tray is used to store the packages for order picking. Of course, the number of packages is limited and the total weight of the filled tub must not exceed 30kg. But this solution proves to be extremely practical, especially when picking small packages. Thanks to this extension, the entire process can be mapped.

Complete solution.
Direct access to the WWS is given, it can be labeled and the boxes can be handed over with the corresponding delivery and order papers. Major advantage.
This bracket can be retrofitted at any time. All you need is the ram protection, because it serves as a mounting point for holding the tub. The largest plastic tub that can be used has a volume of 600x400x330mm - i.e. 1m³.

Andreas Brenke Vertrieb

"We will gladly answer your questions"

+49 (0) 751 76 414 0

Battery unit and DC-AC converter unit

Mobiler Arbeitsplatz Lager Akku Min

The essential part of our mobile warehouse workplaces is ensuring the power supply. The supply units for the trolley solutions are selected depending on the consumers, in particular their supply voltages (AC or DC) and their power consumption (VA). The battery unit of the mobile warehouse workstations consists of a maximum of two batteries with a maximum of 120Ah. The standard supply voltage is 24V DC. On request, a DC / AC converter can be retrofitted to supply 230V AC - then variants up to 1200W are available.

Supply voltage: DC 24V. Optional: AC 230V (350W, 600W or 1000W)
Capacity: 65Ah (40Ah mAP 35 x 66) Optional: 85Ah or 120Ah
The information relates to lead-gel batteries. With LiFePo battery technology, the values ​​can change accordingly.

  • Battery units with 24V DC supply voltage
  • Battery monitoring unit with
  • Converter units for 230V DC as options in different power dimensions

The differentiation of the mobile warehouse workplaces was made depending on the following criteria:

  • Space in the warehouse and analysis of the routes in terms of width
  • The dimension of the upper work surface on the respective mobile warehouse workplace
  • The number of printers to be carried
  • Solid tubular frame structure including two removable aluminum fronts
  • Sheet steel housing
  • Color: dark gray (RAL7015) and dark blue (RAL5002) or according to customer requirements
  • Push handle for easy handling
  • Two swivel castors and two fixed castors - diameter: 125 mm
  • In addition to the tires: different rubber hardnesses are possible
  • Drawer compartment